Place the candy thermometer into the pan. Boil until the mixture reaches 234°F on a candy thermometer. Stir gently throughout the entire boiling time. Note: If you do not have a candy thermometer, allow the mixture to boil for 7 or 8 minutes but do not exceed 9 minutes.
How long do you boil fudge to get to soft ball stage?
Soft ball stage is 112-115c (234-240c). You can also test for soft ball stage by using a glass of cold water. When the fudge has boiled for about 10 minutes start to test by dropping a little of the mixture into a glass of cold water.
What happens if you boil fudge too long?
Candy that isn’t cooked long enough will end up too soft; overcooking makes fudge crumbly or hard. High-quality fudge has many small crystals. If the process of crystallization begins too early, fewer crystals form and they become much larger.
Can I bake fudge that didn’t set?
If your fudge will not set after heating and stirring, but it does not have a grainy texture, you have cooled your fudge properly, but you did not heat it to high enough a temperature during the cooking stage. To reset soft fudge, return it to the pot and add in 1 to 1 1/2 cups of water per batch of fudge.
What temperature do you boil fudge?
Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F). The cooking is intended to evaporate a part of the liquid and concentrate the sugar. The temperature of the cream/sugar mixture (called syrup) rises as water evaporates.
What happens if you put too much butter in fudge?
A fudge that fails to set up is usually the result of too much butter, the substitution of margarine for butter (too high water content), or results when there is too much water in the fudge (not boiling enough, rainy weather, etc.) … Stir the fudge mixture constantly until it reaches correct temperature.
Why did my fudge turn out like toffee?
If you boil the fudge to a temperature lower than 232 F, your fudge will retain extra moisture, which can make it chewy or in extreme cases, prevent it from setting at all. If the temperature goes much beyond 234 F, the fudge’s final texture will be hard, dry and crumbly.
Why is my fudge not hardening?
In many cases, the sugar, butter, and milk mixture needed to be cooked longer or to a hotter temperature. That’s usually the culprit when fudge doesn’t set. You can try reheating your fudge mixture by adding a little more evaporated milk and bringing it slowly back to the boil.
How long should you beat fudge?
Using a wooden spoon, beat the fudge vigorously until it thickens and begins to lose its gloss. This may take anywhere from 5 to 15 minutes. While beating by hand is the traditional method, you can use an electric mixer if you have one.
Should fudge be refrigerated to set?
Foolproof fudge needs a resting time before cooling.
Allow the finished fudge to cool at room temperature for a while to set. The cooling time depends on the ingredients used, so use the instructions in your recipe for guidance. I don’t recommend putting fudge in the fridge or freezer to get it to set.
Can you make fudge on a rainy day?
Oddly enough, it can. On a humid day, once the candy has cooled to the point where it is no longer evaporating moisture into the air, it can actually start reabsorbing moisture from the air. … This can make the resulting candy softer than it is supposed to be.