Explanation: 25 degrees Celsius is 298 degrees Kelvin; 100 degrees Celsius, 373 degrees Kelvin. = 150 g x 4.184 J/g/K x (373 – 298) K = 47,070 J. Thus, 47,070 J are needed to increase the temperature of 150 g of water from 25 degrees C to its boiling point of 100 degrees C.

## How much energy does it take to boil 100g of water?

How much energy does it take to boil 100g of water? The change in temperature is (100°C – 27°C) = 73°C. Since the specific heat of water is 4.18J/g/°C we can calculate the amount of energy needed by the expression below. Energy required = 4.18 J/g/°C X 100g X 73°C = **30.514KJ**.

## How much energy does it take to boil water?

So in water it takes 1200 joule’s to raise a Kg of water by 1 degree K or in degrees C. If this takes 1 min to boil the power required to boil the water equals 96kilo joules/60 seconds =**1600 watts** or 1.6 kilo watts.

## How much energy does it take to boil 1 Litre of water?

Based on the above answers and examples, to boil 1 litre of water from 20C to 100C, requiring **0.183 kWh** of either electricity or gas, at todays energy prices GAS is 68% cheaper than electricity.

## How many joules does it take to boil 1 gram of water?

The heat of vaporization of water is about 2,260 kJ/kg The value is also equal to **2260 joules** per gram. If you want to evaporate all of the one gram to vapor without waiting for a long time, you add energy to 20° C water until it boil then add 2260 joules per gram.

## How much energy does it take to boil a 125g sample of water?

25 degrees Celsius is 298 degrees Kelvin; 100 degrees Celsius, 373 degrees Kelvin. = 150 g x 4.184 J/g/K x (373 – 298) K = **47,070 J**. Thus, 47,070 J are needed to increase the temperature of 150 g of water from 25 degrees C to its boiling point of 100 degrees C.

## How much energy does it take to boil 100 mls of water if room temperature is 20c?

How much energy does it take to boil 100 mls of water if room temperature is 20c? From the steam tables, the heat capacity is close to 2 KJ/kg/deg C, far from 1.2 that you used, so it takes around 160 KJ to heat a kg of water to 100 C, from 20 C. This brings the total energy needed to **2418 KJ**.

## Is it cheaper to boil water with gas or electric?

Because **gas** is **cheaper** than **electricity**, it works out slightly **cheaper to boil water** on a **gas** hob than using an **electric** kettle, as long as you are **boiling** just the quantity you need and switch off the hob as soon as it has **boiled**.

## How can you boil water without electricity?

**Ways to boil water without electricity**

- Candles.
- BBQ Grill Pit.
- Fire Pit.
- Gas Stove.
- Camp Stove.
- Fireplace or Wood Stove.
- Solar Cooker.
- Rocket Stove.

## What is the quickest way to boil water?

Truth: **Hot water** boils faster.

If you’re in a hurry, turn your tap to the hottest setting, and fill your pot with that hot tap water. It’ll reach boiling a bit faster than cold or lukewarm water. You can also get the water even hotter by using your electric kettle.

## How long does it take to boil 200 ml of water?

One 200 ml cup takes 120 sec to simmer and 6 cups 200 ml will take **12 minutes** to boil.

## Is it cheaper to boil a full kettle?

According to Npower, a **kettle costs around 2.5 pence to boil**. They say: “The average kettle holds 1.5 pints and uses about one unit of electricity to boil 12 pints of water (or 8 x 1.5 pint-full kettles) – so that’s around 2.5p every time you boil a full kettle.”

## What is the healthiest way to boil water?

**1.** **Boiling**

- Bring the clear water to a rolling boil for 1 minute (at elevations above 6,500 feet, boil for three minutes).
- Let the boiled water cool.
- Store the boiled water in clean sanitized containers with tight covers.